Van de Wiele VMM 22 Kadife Kumaş Dokuma Makinası
2 adet Van De Wiele VMM 22 Jakarlı Kadife Kumaş Dokuma Makinası, 1.75 cm genişliğinde, 1991 model, Staubli 2690 armül , kurulu ve çalışır durumda.
Bruckner Powerframe Stenter Machine
Bruckner Powerframe Stenter Machine, 1.80 mt working width, 2 mt roller width, 2016 model, 8 chambers, horizontal chain, pin and clip, at the entrance; padder, Pleva weft straightener, Erhart Leimer edge control, humidification unit, at the exit; 1 pcs cooling cylinder, plaiter and batcher, Siemens PLC, Lenze inverter, 16 burners (located on both side of the chambers), gas heated, installed and running situation.
11 Adet Barmag Marka Tekstüre İplik Üretim Makinası
11 Adet Barmag Marka Tekstüre İplik Üretim Makinası , Kurulu ve çalışır durumda .
ÜRETİCİ | TİP | ÜRETİM YILI | İĞ SAYISI | KULLANIM AMACI | ŞEKİL | ALT FIRIN | LİCRA ŞAFTI | UNITENS | W1 | W2 | W2X | W3 | AIRJET BORU TESİSATI | İKİ TARAFI AYRI KONTROL |
MANUFACTURER | TYPE | PRODUCTION DATE | SPINDLE NO. | PURPOSE OF USE | SHAPE | SECOND HEATER | LYCRA SHAFT | AIRJET PIPING | SIDES SEPERATE CONTROL | |||||
OERLİKON BARMAG | FK6V-1000 | 2003 | 240 | TEKSTURE/TEXTURIZING | V | — | — | yes | MANŞON/NIP ROLL | MANŞON/NIP ROLL | — | — | yes | yes |
OERLİKON BARMAG | EFK-PA | 2011-4 | 240 | TEKSTURE/TEXTURIZING | V | — | ü | yes | GODET | GODET | GODET | — | yes | yes |
OERLİKON BARMAG | FK6-1000 | 2002 | 240 | TEKSTURE/TEXTURIZING | V | — | — | yes | MANŞON/NIP ROLL | MANŞON/NIP ROLL | — | — | yes | yes |
OERLİKON BARMAG | FK6M-1000 | 1997 | 240 | TEKSTURE/TEXTURIZING | M | — | — | yes | MANŞON/NIP ROLL | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 240 | TEKSTURE/TEXTURIZING | M | — | — | yes | APRON | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 240 | TEKSTURE/TEXTURIZING | M | — | — | yes | APRON | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 240 | TEKSTURE/TEXTURIZING | M | — | — | yes | APRON | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 96 | TEKSTURE/TEXTURIZING | M | — | — | yes | APRON | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 96 | TEKSTURE/TEXTURIZING | M | — | — | — | APRON | APRON | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 96 | TEKSTURE/TEXTURIZING | M | — | — | — | APRON | MANŞON/NIP ROLL | — | — | yes | — |
OERLİKON BARMAG | FK6M-1000 | 1997 | 96 | TEKSTURE/TEXTURIZING | M | — | — | — | APRON | MANŞON/NIP ROLL | — | — | yes | — |
Arioli Steamer Machine
Arioli Steamer Machine, 2 mt working width, 2.20 mt roll width, 2014 model, 250 mt fabric capacity, Vapo 2008 type, titanium coated inner surface, plaiter at the exit, gas heated, PLC, inverter, Icotec (Italian) burner, Siemens PLC, Emerson inverter, equipped with special larger diameter aliminium roller with 5 channel and rubber, installed and running situation.
Sulzer CTB Cam Weaving Machine
20 pcs Sulzer CTB Cam Weaving Machine; 3.30 mt width, 6 shafts installed, 10 shaft capacity, 3 frames, 1 pcs weft feeding, 1.5 warping beam, 1.5 fabric beam, installed and running situation
Fongs ALLFIT-30 Brand Sample Tubular HT Fabric Dyeing Machine
Fongs ALLFIT-30 Brand Sample Tubular HT Fabric Dyeing Machine, 25 kg capacity, single tube, 2015 model, installed and running situation.
Fongs Brand Tubular HT Fabric Dyeing Machine
Fongs Brand Tubular HT Fabric Dyeing Machine, 50 kg capacity, single tube, 2015 model, installed and running situation.
Fongs ECO-8-D1T Brand Tubular HT Fabric Dyeing Machine
Fongs ECO-8-D1T Brand Tubular HT Fabric Dyeing Machine, 150 kg capacity, single tube, 2015 model, installed and running situation.
Fongs Brand Tubular HT Fabric Dyeing Machine
Fongs Brand Tubular HT Fabric Dyeing Machine, 300 kg capacity, single tube, 2015 model, installed and running situation.
Metalmak brand Overflow Fabric Dyeing Machine
Metalmak brand Overflow Fabric Dyeing Machine, 300 kg capacity, 1986 model, installed and running situation.
MS Brand Digital Printing Machine
MS Brand Digital Printing Machine, 1.80 mt working width, 2011 model, 8 heads, UFU Brand Drying chamber, running situation.
Selnikel Brank Steam Boiler
Selnikel Brank Steam Boiler, 2015 Model, 135 m2, economizer, condensate tank, GAS HEATED, Weishaupt brand burner, kurulu ve çalışır durumda.
SIFIR Film Laminasyon Makinası – Transfer Baskı Makinası
BRAND NEW Film Lamination Machine – Sublimation Calender (Lamination Calender/ Hot Melt Film Lamination), Turkish Made, roll width beginning from 1,8 mt roller width, PLC control, automatic turn on/turn off, digital counter, stopping feature on requested length, warning with voice and light, chrome coated accessorries, locking gear, pneumatic shaft.
Arioli Steamer Machine
Arioli Steamer Machine, 2.10 mt roll width, 2015 model, 250 mt fabric capacity, Vapo 2015 type, plaiter at the exit, PLC, inverter, can heat up to 180 centigrade degree, 2 burners available, GAS HEATED, installed and running situation.
Mario Crosta Single Drum Raising Machine
3 pcs Mario Crosta Single Drum Raising Machine, 2000 model, 2.70 mt roller width, single drum, touch screen, installed and running condition.
Biancalani Airo 24 Continuous Tumble Drying and Fabric Touch Machine
Biancalani Airo 24 Continuous Tumble Drying and Fabric Touch Machine, 2.40 mt working width, 2022 model, can run with fabric between 70 gr-600 gr, antistatic bar (for sentetic fabric like polyester), suitable for towel fabric, trolley to trolley, gas heated, ONLY USED FOR TEST PURPOSE, BRAND NEW CONDITION, installed and running situation.
Tela Üretim Tesisi , 2.40 mt eninde , 2023 Model
Aylık 3.000,000 Metre üretim kapasiteli 2023 model Nakış ve Ağda telası üretim hattı
– Hattımız hava serme (Airlaid) teknolojisi ile üretim yapmaktadır.
– Nakış ve Ağda sektöründe en çok tercih edilen 25 – 200 gram m2 arası (Polyester + Seliloz + Polyester) üç katmandan oluşan telaları üretme kabiliyetine sahiptir.
– Üretim hattının elektronik sistemi Scada sistemli Siemens PLC, ABB sürücülerle yapılmıştır , Full Otomatiktir.
– 2. 40 mt Makina çalışma eni
– 3 Adet Balya açıcı
– 2 Adet İnce açıcı
– 2 Adet Ambar çivili besleme
– 2 Adet Airlaid Tarak
– 2 Adet Airlaid tarak ön açıcı
– 1 Adet Selilöz kırma ve besleme Sistemi
– 1 Adet Kızğın yağlı kalender
– 1 Adet Fulard 1 Adet
– 1 Adet Köpük makinası
– 2 Adet 3 Tonluk paslanmaz karıştırıcılı binder Tankları ve Pompaları
– 1 Adet Çift Tamburlu doğalgazlı kurutma fırını
– 1 Adet Otomatik Bobin değiştirmeli Dog sarma
– 1 Adet Dilimleme Makinası
– Fitreler, Elyaf nakil fanları, yedek bantlar, yedek teller, yedek sindirler vs. Tüm yedek parça malzemeler birlikte verilecektir.
– 70 mt makina boyu ,
– Kurulu ve çalışır durumda .
Arioli Buharlama ( Fikse ) Makinası 2019 Model
Arioli Buharlama ( Fikse ) Makinası, 2 mt çalışma eni, 2,2 mt silindir eni, 2019 model, Vapo Hybrid Eco tipi, 380 mt kumaş kapasiteli, çıkışta sallama, BUHARLI PLC, invertör, kurulu ve çalışır vaziyette.
Babcock Brand Stenter
Babcock Brand Stenter, 1.80 mt working width, 2.00 mt roll width, 1995 model, 7 chambers, horizontal chain, pin & clip at the entrance; fabric opener, J- Box, Kusters padder, at the exit; plaiter and batcher, gas heated, installed and running situation (Mahlo weft straightener, 1 chamber washing cabin, will NOT BE DELIVERED with the machine).
Van De Wiele VMM 32 Jakarlı Kadife Kumaş Dokuma Makinası
2 adet Van De Wiele VMM 32 Jakarlı Kadife Kumaş Dokuma Makinası, 1.75 cm genişliğinde, 1994 model, Staubli CX-860 Jakar, 2688 çengelli, iplik cağarlık sistemi , kurulu ve çalışır durumda.
Babcock Brand Stenter
Babcock Brand Stenter, 2.20 mt mt working width, 2.30 mt roll width, 1997 model, 8 chambers, horizontal chain, pin at the entrance; fabric opener, padder, Bianco weft straightener, at the exit; plaiter and batcher, Siemens PLC, inverter, gas heated, installed and running situation.
Krantz Brand Stenter Machine
Krantz Brand Stenter Machine, 3.40 mt working width, 3.60 mt roller width, 2003 model, 8 chambers, horizontal chain, pin, Erhart Leimer fabric opener (2013 model), padder (padder rolls are rerubberised in 2023), Mahlo weft straightener both at the entrance and at the exit (2013 model), chain is replaced with brand new one at the end of 2018, video system at the entry and at the exit, humidity control device, ELECTRIC PANEL COMPLETELY RENEWED WITH BRAND NEW IN 2021, Siemens PLC, Siemens inverter, fan motors are controlled by inverter, plaiter and batcher at the exit, Maxon burners, gas heated, installed and running situation.
Kusters Brand Dyeing Padder (Pad Batch)
Kusters Brand Dyeing Padder (Pad Batch), 1.8mt working width, 2002 model, single S vals, PLC (Siemens), inverter (Lenze) dismantled situation, at warehouse.
ITEMA R9500 Jacquard Weaving Machines
16 pcs ITEMA R9500 Jacquard Weaving Machines, 1.90 mt width, 2015 model, Staubli SX jacquard, 2688 hooks, 60 sequence, JC7 controller, 4 weft feeding, 1.5 fabric beam, 1.5 warping beam, installed and running situation.